ERS Inline smart torque tool

Torque 0.6-22 Nm | Speed 380-3000 rpm

MAIN FUNCTIONS CVIR II
Inline smart torque tool
Programming modes
Quick cycle
Learning mode
Number of cycles 50
Number of phases available 15
Phase characteristics
Search sequence
Approach
Run down speed
Final speed phase
Action on NOK
Run reverse
Jump to another phase
Prevailing Torque
Synchronisation phase
Tightening strategies
Torque
Torque with angle monitoring
Angle with torque monitoring
Yield point
Seating detection
Number of stored results 2000 to 10000 according configuration
Controller needed.

Weight	1.54 lbs
Tool Shape	Inline
Output Drive Options	1/4" Hex Quick Change for Power Bits, 3/8" Square Drive
Start Mechanism	Trigger/Lever
Power Source	Electric
Controller Options	CVIR II
Voltage	18 (V)
Tool Series	ERS
Additional Features	Torque and Angle Control, Modbus
Torque Range	5.3-22.1 In.Lb (0.6-2.5 Nm), 8.8-53.1 In.Lb (1.0-6.0 Nm), 13.3-106.2 In.Lb (1.5-12 Nm), 53.1-194.7 In.Lb (6.0-22 Nm)

ERS Inline smart torque tool

Login

Register