The TLS1 Telescopic Carbon Positioning Smart Arm is an intelligent system that error-proofs your assembly ensuring that every screw is in the correct location at the right torque.
Assembly sequences and X-Y coordinates are easily programmed with user interface screens through the keypad from the intuitive menu.
Torque programs are automatically selected and enabled from the screwdriver controller based on the TLS1 Arm locations and current sequence step. No PC is required.
8 available programs and up to 35 screws per program.
Screw position (length/angle) with accuracy: length ± 1 mm; angle ± 1°.
Programmable tolerance and manual reset.
External keyboard and serial port for easy programming and statistics.
The TLS1/CAR Arm consists of a torque reaction arm with an encoder mounted at the pivot point and with a linear metering resistor. The encoder records the angle and the linear resistor records the distance. X-Y accuracy can be set by the operator according to each application.